Quick Start

Setting up the database, registering cards, receive an SMS, test scenarios, uploading data, confirm results.

 

This getting started guide takes under 30 minutes to complete.

 

To get started, ask two people to help you test the system. You will need three cards in total, one for you and two for your helpers. One card holder will move further away, the other card holder will stay near to you, at six feet or closer.  This will help confirm close contact.

 

Contact Harald has been designed specifically for contact tracing, the cards need to be worn with the supplied lanyards or clips and worn in front.  Because Bluetooth inside the cards performs differently when not on a person, for accuracy please test on people, not simply placed on a table or chair.

Getting started

Setting up Visitor-Log app to the secure database

To link your Visitor-Log app to the secure database, we need to add your customer ID along with your login credentials. Please refer to your Welcome Letter to retrieve login details.

1. Turn on multi-tenant in your iPad Settings

Go to your iPad Settings. Scroll down and find Visitor-Log app. Make sure Use multi tenant server is enabled. 

Back to home screen, now you may go to Visitor-Log app.

2. Open and login to your iPad App (One-time login only)

If you don't see four fields in the start up screen. Please close and reopen the app, or repeat Step 1.

Enter your login details:

App username: your-email-address

Password: (supplied)

Domain: (supplied)

Customer ID: (supplied)

Domain

Your Domain name is the end part of your URL address, for example:

abc-electronics.contactharald.net

Customer ID

If your company is abc-electronics, your Customer ID for the iPad will be the first part of the URL address, for example:

abc-electronics.contactharald.net

Please don’t change this, unless instructed.

ipad-multitenant.png

Turn on Multi tenant server in your iPad Settings (Click to zoom in)

ipad-login.png

Visitor-Log app sign in screen (Click to zoom in)

Setting up the secure database

As the Super Admin, you have additional privileges to setup the system.

Open your browser such as Chrome or Safari.  You can perform this step on your laptop, desktop or other device.

1. Log in with your Super Admin details

The log-on details were emailed to you, including the website address

The website will be something like:

 

yourcompany.contactharald.net

Username: your-email-address

Password: (supplied)

2. Change your password

In the top right corner, click on the username.

 

Click on Change password. Update your password now.

 

For this quick start, we will not add other users to the system.

3. Customize the welcome SMS

Each time a new card is enrolled, a welcome SMS is sent to the card holder. This can be a short consent message and your facility contact information.

Click on Communications then Saved Templates on the left hand side navigation menu. You can setup multiple templates for SMS and email communication from your organisation. 


Click on Edit button next to the Registration SMS in the list.
 

Edit the Message body and click Save. Do not change the ‘Registration’ title.

login.png

Login page (Click to zoom in)

manage-profile.png

Manage account (Click to zoom in)

saved-template.png

Saved template page (Click to zoom in)

 

Registering cards

The iPad is used to register cards. Personal data is securely transferred to the database and stored encrypted. 
No personal information is stored or saved to the card. 

A note on privacy

Each card is assigned a random ID, which can only be matched against other card IDs if the owner of the card hands it over. During normal operation the card does not communicate with the Internet, WiFi or mobile phones.  Pressing the button will permit the card to temporarily communicate with a secure App on the iPad or other device via Bluetooth. The stored random IDs are uploaded to the database for matching. 

  1. Open the iPad app
     

  2. Tap the Register button
     

  3. Answer facility screening questions
    Each card holder may be asked screening questions. The questions can be customized to your facility.  

     

  4. Tick the SMS consent box
    The cardholder must tick the SMS consent box to receive welcome and follow-up SMSs. We customized the SMS in an earlier step. Click Next.

     

  5. Register the card holder. Enter the card holder’s details with a valid phone number and email address. 

    Click Scan QR-code to register the card.  Hold the card in front of the camera, until the QR-code is automatically registered.  This works best with reasonable ambient light. Click Save Profile

     

  6. Register the card. To save the random ID to the card, press the button on the front of the card at the top.  You will see a blue LED (on the back of the card) flash. The App will display ‘updating the card’.  A confirmation message will then show ‘Profile created.’  


    Receive an SMS:
     

  7. An SMS will be sent to the card holder. 
    (If the SMS is not received, please wait a moment. Occasionally SMS can be delayed by the carrier. Also check that the phone number was entered correctly and the cardholder consented to receive SMSs).

    This is the first registered card.  Bluetooth on the card is now looking for other cards in close proximity. 



    Test Scenarios:

    This is the first registered card. Bluetooth on the card is now looking for other cards in close proximity. 

    Ask your helper to put the card around their neck and walk away, perhaps to the next room or greater than 20 feet away and wait for 20 minutes. This is the distant card holder.

     

  8. Tap Create another profile to register. Follow the steps above and register the second card holder and yourself.  Stay together within six feet of each other.

    Once finished, you should have three cards registered, one person further away and two close together, all wearing the Contact Harald cards.  Wait six minutes or more minutes then move to the next step.

ipad-app.png

iPad App Dashboard (Click to zoom in)

ipad-checklist-2.png

Answer facility screening questions (Click to zoom in)

ipad-contacts.png

Enter card number (Click to zoom in)

ipad-scan.png

Register the card, scan QR code (Click to zoom in)

 

How contact events are recorded

Contact Harald records a contact event as “two minutes together in close proximity, less than about six feet or two metres away”.  The system takes approximately 6 minutes from first commissioning to start synchronizing logged events.  Once rolling, the system will record events every two minutes

Contact tracing results (Click to zoom in)

Contact events are grouped into 15 minute periods. The example above shows from 2PM (to 2:15PM) there was a contact count of two.  This means the cards were in close proximity for approximately 2x2 minutes, or 4 minutes, over that 15 minute period.

 

Because Bluetooth 5.0 technology uses radio waves, the distance between two people is approximate, due to radio transmissions and other factors. The best performance is achieved when the Harald card is worn in front, using the supplied lanyard or pocket clip. 

 

If for example the card is in your back pocket it will record events behind you, which defeats the purpose as a contact event is a record of an event from the front, from potential airborne particles. 

Uploading data

  1. Now that six minutes or more has passed, we can test an upload.  Take your card from the person nearest to you.
     

  2. Open the iPad app
     

  3. Tap the Upload button.  
     

  4. Press the button on the front of the card at the top. You will see a blue LED (on the back of the card) flash.  The App will display ‘Transferring data’.  
     

  5. We now have proximity data loaded onto the secure server.
     

  6. Open the secure Contact Harald web-app.  This can be accessed on your device or remotely.

ipad-upload.png

Dashboard - Upload card data (Click to zoom in)

Confirm Results

  1. Go back to the secure Contact Harald website. You may need to log back in.
     

  2. Enter the Contact Harald secure website URL, username and password. This URL was supplied to you in the welcome email.  Log-on will be your email address and a temporary password.
     

  3. Once logged in, click on Contact Tracing, on the left hand side menu, or from the top menu (if you are on a mobile device).
     

  4. You can lookup a person by name or email or phone number. For now, leave all fields blank and click the Contact Trace button. Leaving all fields blank will look up all people who have at least one contact event.
     

  5. You should see a match with your name and the person next to you, showing that 1 person has been in contact with the other. Click Contact Trace on the right side of the name. (See screenshot below)
     

  6. In the example (see screenshot below), we will be looking at who Jason Smith has been in contact with. 
     

  7. Jason Smith has been in contact with Laura Reeves for a total of 10 contact events, or a total of 20 minutes (10 x 2 minutes).  If you need a breakdown of the contact events and approximate time periods click on Event from the View menu.  For now, we will skip this and go to sending an SMS.
     

  8. Tick the box next to Laura, this will enable the Send SMS and Send Email buttons. 

    This enables you to quickly inform others if needed, such as visitors or staff previously in contact, that they may need to isolate and get tested.

    In the example above, if Jason Smith was in contact with more than one person, this would be the list of contacts, which you could then tick or not tick.

     

  9. Tap the send SMS or send email.  Compose your message or use a system stored template (templates can be customized by you). Click Send Now

Screen Shot 2020-08-13 at 6.05.21 pm.png

Reference 5. Contact trace (Click to zoom in)

Screen Shot 2020-08-13 at 6.07.32 pm.png

Reference 6. Jason Smith has been in contact with Laura Reeves (Click to zoom in)

This completes the first sample run of the Contact Harald system.  You can now explore further functions of the system or review the documentation.  If you have any questions feel free to contact us at setup@contactharald.com or call us.

 

Further questions?

Speak to our team, or use the Live Chat on our website to get in touch.

Answer facility screening questions